Longer Bolts to Use Thule Tracker II Feet with Track System in a Leer 180 Camper Shell

Question

Question:

Hi there, I have the Thule 430 Tracker II Feet TK5 Kit and am trying to fit in onto the rails setup on my Leer 180 camper shell. I contacted Leer to find out what I needed and came here and purchased 4 Repl Track Nut For Thule Tracker II Half Foot Pack Or 4 0 4 Repl Spacer For Thule Tracker II Half Foot Pack 4 0 But now the screws/bolts that I have are not long enough. Do you have the correct bolt for this application? Thanks in advance

asked by: Jarlath O

0

Expert Reply:

How long do the bolts need to be? The regular ones for the Tracker II set ups are M6 x 17mm, # 924-0617-15. We have a pair of M6 x 27mm bolts, # 1500052564. The other M6 options are going to be much longer.

expert reply by: Michael H

0

Answer 1

Yes. Since the Inno Square Crossbars #INB147 have the same dimensions as the Thule SquareBar Evo Crossbars #TH712300 (7/8" tall x 1-1/4" wide), the Inno Square Crossbars will fit the Replacement Railing Foot for Thule Tracker II…

view full answer...

Answer 2

The Thule feet for square crossbars part #INXP are a direct fit for the tracks of camper shells like what is commonly found on ARE or Leer campers shells. Or you could use 42 inch long tracks like the part #THTP42.

view full answer...

Answer 3

I have a solution for you, but the part #753-2149 is designed to be attached to the factory fixed points of a vehicle roof and not a camper shell. Instead you would want the part #TH29200XT as it has been confirmed as a fit for your 2008 Ford…

view full answer...

Answer 4

In sort of a backwards way we know that the part #753-2149 does fit the feet you have since we had a customer with a TK1 tell us that on the bottom of the foot they say your same part number of 8535122

view full answer...

Answer 5

You can use Podium Foot pack #TH460R, Fit Kit #THKIT3101 and the Thule square crossbars of your preferred length. Here are a few of the most popular bar sizes: #TH712200 set of two 47-inch bars #TH712400 set of two 53-inch bars #TH712500 set of two…

view full answer...

Answer 6

I do have an option for you but the Yakima Q-Towers cannot be mounted to a set of tracks or directly to the roof. These towers are only designed for bare roofs which they attach to with door clips. For a cost effective roof rack that will work with…

view full answer...

Answer 7

I have attached for you below a photo of the Replacement FootBase Thule Tracker RoofRack Fit Kits part #753-2149 which shows how it's secured to the track.

view full answer...

Answer 8

You are correct, you need the Thule Fit Kit #THKIT3101 to connect the Thule Roof Mounted Top Rack System #THTB60 that is on your Leer Work Cap, to the Rapid Podium Feet #TH460R. And then finally your Thule SquareBar Evo Crossbars #TH712500. I highly…

view full answer...

Answer 9

Yes, cover #853-7084 will fit the Thule Tracker and Tracker II assemblies including #753-2149.

view full answer...

Answer 10

The Replacement Railing Foot for Thule Tracker II Foot Pack #753-2152, which is no longer available from the manufacturer, will fit your Thule Crossroad Crossbars, however these feet will mount to a system like the Thule Top Track #THTB60, which your…

view full answer...

Answer 11

The difference between the end caps is simply that the Thule Load Bar Replacement End Caps THEC1 are the older version of replacement end caps, while the Replacement Endcaps for Thule SquareBar Roof Racks #TH1500052968 are direct replacement caps for…

view full answer...

Answer 12

I reached out to my tech contact at Thule and the Replacement Railing Foot for Thule Tracker II Foot Pack #753-2152 along with the base #753-2149 will give you about a 7 inch height when combined. This will clear your 4 inch object with a little room…

view full answer...

Longer Bolts to Use Thule Tracker II Feet with Track System in a Leer 180 Camper Shell

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching