How to Measure a Travel Trailer to Choose a Storage Cover

Question

Question:

How do I measure the length of my trailer to get the right size cover? Do I measure bumper to tongue or just the body of the camper?

asked by: Mark

0

Expert Reply:

For a travel trailer cover you will measure the length, width, and height of the body. Also if the trailer is in between sizes it is always better to go with the larger cover and have some slack than the smaller cover that might not fit. I have included a link to our selection of travel trailer covers.

expert reply by: Michael H

0

Answer 1

The reason your #290-64844 seems a little big is because the measurement you took included the length added by the rear spare tire. The cover manufacturers recommend measuring the box length not including the coupler portion up front and the spare…

view full answer...

Answer 2

Yes the Furrion Vision S system part #FOS05TASF that you referenced would be a great choice for your towing setup. This is the most reliable and longest range wireless observation system out there so we recommend it the highest. Also since…

view full answer...

Answer 3

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 4

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 5

The absolute best towing mirrors for your 2024 Ford F-150 are the K-Source Snap & Zap Custom Towing Mirrors #KS69NQ because they slip on over your OEM mirrors for a great fit that minimizes how much road vibration you see in the mirrors. We had…

view full answer...

Answer 6

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...