Potential RV Trike Carrier for Carrying 2 Trikes

Question

Question:

Have a 31foot motor home sunseeker by forest river. Want to haul 2 three wheel trikes.......looks like your 32X72 carrier is the only one that will work......any comments or recommendations?

asked by: Bob W

0

Expert Reply:

You could potentially carry a trike on the Swagman bike carrier # S80600. Out of the available options for carriers rated for use at the back of an RV or trailer, this is the only one that could potentially hold the trike.

The # S80600 is 34 inches wide so it would be wide enough for the trike most likely but it might get interesting trying to also carry a second trike.

expert reply by: Jameson C

0

Answer 1

You could potentially carry a trike on the Swagman bike carrier #S80600. Out of the available options for carriers rated for use at the back of an RV or trailer, this is the only one that could potentially hold the trike. As long as you stay under…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 7

While the Sliding B&W Patriot 5th Wheel Trailer Hitch #BWRVK3270 will not fit on the Demco 5th Wheel Rail Adapter #DM6333 I would recommend going with the B&W Companion OEM 5th Wheel Hitch #BWRVK3775. This will fit into the factory…

view full answer...

Answer 8

Hey Bob, thanks for writing in, and you got yourself one heck of a truck with the 2024 Silverado 2500HD. And though you'll need an adapter since you have the factory prep package you can definitely use the Andersen Ultimate Connection 5th Wheel…

view full answer...

Answer 9

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 10

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...

Answer 11

The Westin Custom Fit Truck Bed Mat #W55XV is the best option for your 2024 GMC Sierra 1500 with the 5-3/4' bed because it has a thick durable rubber construction as well as grooves running front to back of the bed to make it easier to clean out…

view full answer...

Answer 12

Hey Vernon, so the puck systems of the Ram and Chevy trucks are different so you wouldn't be able to use your current B and W Companion slider as-is in the bed of your 2024 Chevy Silverado 3500. So if you wanted to reuse the head from your…

view full answer...