Replacement Hex Wrench to Tighten Yakima Roof Rack with Control Towers and Round Crossbars

Question

Question:

I have misplaced my key to tighten the roof rack. Do you sell just a key? Screw drivers do not work.

asked by: Diane E

0

Expert Reply:

You have the Yakima Control Towers with round crossbars. In one of the pictures you can make out the Yakima logo on the base of the tower. The tightening tool for this is a 5 millimeter hex wrench, part # 8880143.

expert reply by: Charles S

0

click to enlarge

Answer 1

For a replacement Yakima hex wrench we have the part #8880143 which is the size of 5 mm.

view full answer...

Answer 2

The correct lug nut torque range for any given trailer depends on several factors include the lug diameter, lug nut type and wheel material. Please refer to the linked chart that shows the usual recommended torque range for a variety of combinations.…

view full answer...

Answer 3

Yes. You can mount an awning on Yakima Overhaul HD systems like the #Y01151-5855. If you wanted to use the Yakima Slim Shady Awning #Y36VR, that awning will mount using the included clamps to the HD bars on the Overhaul system. If you're wanting…

view full answer...

Answer 4

We do carry replacement parts for the Yakima Railgrab foot. For the claw base and nut you would want the part #Y8880279. The medium claws are no longer available. For the claws with pin adapters you would want the part #Y8880201. For replacement…

view full answer...

Answer 5

We have exactly what you need, though the wrench you mentioned won't work with your Yakima PowderHound 6. I checked directly with Yakima for you and verified the correct replacement hex wrench is the following: - Replacement 5/32" Hex Wrench…

view full answer...

Answer 6

I reached out to Yakima and your Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Skis or 4 Boards #Y03093 and the security wrench used is the Replacement 5/32" Hex Wrench for Yakima Rooftop Carriers - Tamper Proof #8880818. The…

view full answer...

Answer 7

For your Thule snowboard carrier 91725B the correct tamperproof tool is actually the part #853-5270-02.

view full answer...

Replacement Hex Wrench to Tighten Yakima Roof Rack with Control Towers and Round Crossbars

Product Page this Question was Asked From

Continue Researching