Adapting 5-Way Round to 4-Way Flat for a Motorcycle
Question:
I have a 2000 HD FLHR with a sidecar fitted. I have now acquired a tow hich with the round 5 pin connector. My trailer is a normal flat 4 pin connector. What do I need to connect the two? Cheers,
asked by: Joe L
Expert Reply:
The 5-Way on your Harley might actually have separate circuits each for brake lights, left turn signal, and right turn signal. A 4-Way will have the brake lights and turn signals on the same circuits. To tow a trailer that has combined wiring with a motorcycle that has separate wiring I recommend converting the Harley connector to match the other bike and the trailer.
All you will need is a converter, # 119178. On the input side you will connect the wires from the bike's 5-Way. The red wire on the converter is brake lights, green is right turn signal, yellow is left turn signal, brown is running lights, and white is ground.
If you don't want to remove the 5-Way on the Harley you can just tap into the wires. Just make sure to keep the unused connector covered so it doesn't get wet or corroded and cause a short.
Products Referenced in This Question
Upgraded Circuit Protected Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 5 Round
- Pollak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: 4-Square to 5-Round Trailer Connector
- Shop: Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
- Video: Pollak Wiring - Trailer Connectors - PK11502 Review
- Shop: Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals - Chrome - Vehicle End
- Shop: Trailer Wiring
- Video: Pollak Wiring - Trailer Connectors - PK11501 Review
- Q&A: When Wiring a Motorcycle 5 Pin Round Trailer Plug What is the Standard Wiring Diagram
- Q&A: Adapting 5 Pin Round Connector on Harley-Davidson to 4-Pole Flat Trailer Connector
- Shop: Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester - 6-Pole to 4-Pole
- Shop: Towing Mirrors
- Shop: Trailer Hitch
- Q&A: 5 Pin Round to 4 Pole Flat Trailer Connector Adapter for Motorcycle Pulling a Trailer
- Shop: CIPA Universal Fit Towing Mirror - Clamp On - Adjustable Length - Steel
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Connecting a 5-Pin Trailer Wiring Harness for Motorcycle to a Trailer with 4-Way Flat Plug
- Q&A: Pin Functions of Pollak 5-Pole Round Pin Trailer Wiring Connector
- Shop: Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
- Shop: Adapter 7 Pole to 5 Pole Flat Wired Adapter
- Video: Curt Trailer Hitch Installation - 2017 Chevrolet Cruze C11492
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Search Results: 25580
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class