Replacement 4-Pole Wiring Harness for 2005 GMC Yukon XL
Question:
This may be off topic but Im curious if my idea would work. My factory wiring harness on 2005 yukon has lost the left turn/brake lights yellow wire. The easiest solution I can think of is junction straight off the driver marker and brake light, then tie them directly to the yellow wire on vehicle side plug. I have to keep the 2 circuits isolated while connecting to the single yellow wire. Will a diode do that for me.
asked by: John M
Expert Reply:
You probably could rig your damaged wiring harness in the way you describe, using diodes to keep the circuits separated, but I suggest just replacing the harness with a 4-pole set-up like # C59496. This is a hardwired harness with a substantial current capacity of 2.1 amps per stop/turn circuit and 7.5 amps for the tail lights.
The risk in doing what you describe is that the wiring/circuits you would be accessing for signals may not be able to provide the required current for the trailer lights. You might overload those circuits if the trailer lights pull more current than they can deliver.
Products Referenced in This Question
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Tail Light Isolating Diodes (Qty 4)
- Accessories and Parts
- Tow Bar Wiring
- Diodes
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR1904-Z Review
- Shop: Trailer Wiring
- Q&A: Is The Dump Door Hinge for Dump Trailers # PLR1904-Z Able To Open 180 Degrees?
- Search Results: hinge
- Shop: Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Video: Hopkins Tow Bar Wiring 48955 Review
- Shop: Suspension Enhancement
- Q&A: Will The Air Lift Cradles Work With 7500XL Springs on a 2021 Ram 2500 With 5" Lift Kit?
- Shop: Vehicle Tow Bar Wiring
- Search Results: 7 pin wiring harness
- Search Results: curt wiring
- Search Results: 56475
- Q&A: Is Air Lift Spring Cradle Compatible With LoadLifter 5000 With Stainless Steel Roll Plates
- Q&A: Does Polar Hardware Dump Door Hinge, Steel # PLR1904-Z Have Weight Capacity
- Q&A: Door Hinge Bracket with 4 Inch Width
- Q&A: Dimensions of Polar Steel Dump Door Hinge PLR1904-Z
- Q&A: Can Bolt of Dump Door Hinge # PLR1904-Z Be Removed
- Search Results: diode
- Search Results: led tail lights
- Search Results: diodes
- Shop: Curt 7-Way Trailer Plug Extension - 20"
- Shop: Roadmaster Hy-Power Diodes (Qty 4)
- Shop: Replacement 6-Amp Diodes for Blue Ox Tow Bar Wiring Kit - Qty 12
- Shop: Roadmaster Smart Diodes for Variable Voltage LED Tail Lights - Qty 2
- Shop: Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Shop: Replacement 9-Terminal Diode Block for Blue Ox Tail Light Wiring Kit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams