How to Install PullRite SuperGlide 2900 In Factory Rail Kit of 2016 Ram

Question

Question:

I would like to use my PullRite super glide modle 2900 in a 2016 long bed ram with factor prep, what kit can i use?

asked by: Garland R

0

Expert Reply:

The Pullrite 2900 is designed for industry standard 5th wheel rails. That means that the adapter part # RP30154 would be all that you would need to install the hitch in the bed of your 2016 Ram 2500.

This adapter fits the rail package of your truck bed and gives you the needed rails to install a fifth wheel hitch.

expert reply by: Jameson C

0

Dave W.

3/17/2024

Hi Jameson C, I have a new pullrite #2915 which comes ready to fit factory Chevy/gmc pick system. I’d like to use it in my ‘08 Ford 450. Can I change the mount on this hitch to fit standard bed rails? Thanks very much!! Dave

Reply

Jameson C.

3/18/2024

@DaveW That would be a good question for Pullrite. I believe their leg kits are able to be changed but we don't know for sure what part numbers you would need.

Reply

Answer 1

If your Pullrite is one of their ISR (industry standard rails) series, then yes, the hitch will fit into the rails provided by the #RP30154. If you look at the photo I provided, you can see the slot dimensions of ISR rails. If your hitch has mounting…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 4

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 7

To best combat chucking, between a MORryde and Rota-Flex pin box, the best option to replace your Lippert 1621 is the Rota-Flex, with the correct part number being the following: - Trailair Rota-Flex 5th Wheel Pin Box #LC328330 While no pin box is…

view full answer...

How to Install PullRite SuperGlide 2900 In Factory Rail Kit of 2016 Ram

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching