Length of the Retractable Section of the Erickson Retractable Ratchet Straps, part # 34413

Question

Question:

I would like to know how long is the non retracting end from the end of the hook to the center of the ratchet? I have a jet ski and dont want the ratchet laying against the hull. I am replacing the pair I have now that are broken and the distance from the end of the hook needs to be between 9 and 14 inches. Thank you. If these wont work then maybe you have ones that will. They dont have to be retractable but I want ratcheting. See the attached photo.

asked by: Steven M

1

Helpful Expert Reply:

I went out and pulled a Erickson Retractable Ratchet Straps, part # 34413 from our warehouse to get the dimension you asked about.

From the inside of the hook to the nearest portion of the ratchet assembly measures 6-1/2 inches and then from the inside of the hook to the furthest point out on the ratchet measures 10 inches.

expert reply by: Jameson C

1

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 3

The Dexter 8-222 model hubs currently on your trailer are designed primarily for mobile home use, and these types of hubs typically use unique bearing combinations that make it really difficult to find full replacement assemblies. Mobile home parts…

view full answer...

Answer 4

We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video which…

view full answer...

Answer 5

Yes, the Firestone Coil-Rite Air Helper Springs #F4175 will work great with your 2022 Volkswagen Atlas.

view full answer...

Answer 6

The 24x60 etrailer Cargo Carrier for RV Bumper - Steel #e99049 will work for your 2020 Rockwood Roo 235S as long as the rear bumper is 4" wide and either 4" or 4-1/2" tall. This cargo carrier has a 500lb weight capacity and has the…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

view full answer...

Answer 9

The first thing I recommend doing is to check that the ground wire for the lights is securely attached to a clean metal surface on the trailer frame. A loose ground wire will keep the lights from working. If the ground attached to the trailer does…

view full answer...

Length of the Retractable Section of the Erickson Retractable Ratchet Straps, part # 34413

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching