Does the Timbren Spring Kit # TGMRCK25 Fit a 1996 GMC 1500 Truck

Question

Question:

Can I make this kit fit a 1500 2wd? I just changed my rearend. I installed a rear from a 2500 LD 4wd. Its a 9.5 14 bolt. Will this affect anything?

asked by: Nick H

0

Expert Reply:

From an install point of view the part # TGMRCK25 will still install just fine since the spring attaches to the frame of the truck and not the axle. If the axle is larger or smaller in diameter it would change when the spring engages.

If it was bigger it would engage sooner or if it was smaller it would engage later.

expert reply by: Jameson C

0

Answer 1

The Timbren Rear Suspension Enhancement System, part #TGMRCK25, is much easier to install than air springs, no air hoses need to be run, no compressors or gauges to hook up. This kit will also not affect your unloaded ride quality as much as adding…

view full answer...

Answer 2

For your 1998 Chevy K2500 we have suspension enhancement that fit with an in-bed hitch like the Timbren part #TGMRCK25 but we do not have any air bag kits that fit your truck configuration.

view full answer...

Answer 3

We don't have any air bag suspension kits that fit your truck and are also compatible with in-bed hitches. We have other options that would thoug if you'd be interested?

view full answer...

Answer 4

For your 12V wiring to your 7-way, we have people running many different things off that 12V wire. 12 gauge or even better 10 gauge ensures that the power is transferred timely and accurately. We have a kit for brake controllers and 12V wiring for…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 6

The first thing I would do, if you think something might be wrong with the transmission, is have it looked over by a qualified mechanic or technician at a dealer. Automatic transmissions are complicated and expensive to replace so catching…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Does the Timbren Spring Kit # TGMRCK25 Fit a 1996 GMC 1500 Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching