Replacement Solenoid Valve Recommendation for DICO Model 60 Actuator

Question

Question:

I have a DICO model 60 actuator, Ive changed from drum to dics and in the process have changed the master cyclinder and added the back up selenoid. The part # 4748800 on the site said that this selenoid is for the model 10 and 20 acuators. Is this the correct selenoid for a model 60?

asked by: Mike O

0

Expert Reply:

Yes, I spoke with my contact at Titan and he informed me that the Replacement Solenoid Valve for Model 10 & 20 Actuator, part # T4748800, will fit all model actuators. So this # T4748800 will work on your DICO model 60 actuator.

expert reply by: Jameson C

0

Answer 1

Orifice Connector #T1209800 is for drum brakes. It is the new style with 1/8" NPT threads. For disc brakes you would need #T4750300. Drum brakes actually do not take the larger hole. Drum brakes require around 1000 psi whereas disc brakes…

view full answer...

Answer 2

We do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - #T4395100 (you have to remove the check valve) Replacement Damper - #T4502000 Replacement Lock Spring - #T4501400 Replacement Bolt -…

view full answer...

Answer 3

Unless you know the exact part number of your Titan Model 60 Actuator that I can reference the best way for you to know if you have a lockout functions is for you to physically inspect the actuator. There are 2 different types of lockouts; manual and…

view full answer...

Answer 4

I've linked a help article that will give you the common color coding but on your trailer I wouldn't go by it. Even if they are correct you just never know so I suggest testing it. To test it cut off the 5-way connector that's on there…

view full answer...

Answer 5

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

view full answer...

Answer 6

It is definitely possible that your solenoid is bad and is the reason the reverse lockout isn't working. The fact you can you hear yours click but it is still not activating would indicate this is the problem. To pick out a replacement we would…

view full answer...

Answer 7

The 07100 bearing number you referenced is an older bearing that has the same dimensions as #L44643. If both the inner and outer bearings on your existing trailer are the 07100/ #L44643, and the hub has a 4 on 4 inch bolt pattern, the correct…

view full answer...

Answer 8

Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a…

view full answer...

Answer 9

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…

view full answer...

Answer 10

If you are absolutely sure you'd never be over the 12k number you listed a 12.5k actuator like the Demco part #DM8104311 would work great. I really like how easy to use the EZ latch couplers are of the Demco actuators. If you wanted extra…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

I really wish there was a cheap and easy way to lock out a Titan model 60 actuator but the only way would be with an electric lock out like the part #T4748800. This threads onto the back of your current actuator and once ran to the reverse light…

view full answer...

Replacement Solenoid Valve Recommendation for DICO Model 60 Actuator

Product Page this Question was Asked From

Continue Researching