How to Pick Out Trailer Hubs and Brake Assemblies for Camper
Question:
Have a 2006 Rockwood Freedom 1910. What size drums and brakes do I need? Id like to buy drums, brakes, and anything else I might need all at the same time. Thanks in advance, Brad.
asked by: Bradley P
Expert Reply:
The model numbers you listed do not reference any of the parts that we carry but we can still help you get the replacement parts you need.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Once you find the hub you need the correct brake assembly will be listed in the related parts on the product page of the hub.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Q&A: Difference Between Dexter Hub and Drums 42866UC3 & 42866UC3-EZ
- Q&A: Correct Replacement Braking Assemblies and Hubs for a 2009 Airstream PanAmerica
- Q&A: Correct Replacement Brakes for a Dexter 23-459-01 and 23-458-01
- Article: Trailer Tire Sizing
- Q&A: What is The Design Height Of The Air Lift Air Bag Helper Spring # AL50217?
- Q&A: Trailer Hub Replacement for 2021 Grand Design Reflection 5th Wheel with 5,200 lb Axle
- Q&A: Do Trailer Drums have to be Machined or Turned when Replacing Brake Assemblies
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision