Fit and Compatibility of RV Covers for a 2016 Itasca Navion 24J with Bunk over Cab

Question

Question:

Looking for a cover that will best fit our 2016 Itasca Navion 24J with cab over bunk.

asked by: Jim C

0

Expert Reply:

I was able to find the overall length (25 foot 5 inches), exterior height (11 foot 2 inches), and exterior width (7 foot 6 inches) of your 2016 Itasca Navion 24J Cab over bunk Class C Motorhome.

The height of each model is measured to the top of the tallest standard feature and is based on the curb weight of a typically equipped unit. The actual height of your vehicle may vary by several inches depending on chassis or equipment variations. So you will need to measure to ensure proper fitment.

Using these measurements found during my research, the model 3 # 052963793635 would be the closest Classic cover to your RV's dimensions at 23-26 foot length but will have a max height of 122 inches.

The RV cover part # CAM45742 has dimensions of 26 foot long x 110 inches wide x 98 inches tall. For a taller cover you could get part # CAM45743 that is a 28 foot long cover that has 102 inches of height and 110 inches wide.

I have linked the above mentioned products to this page for your convenience.

expert reply by: Jackie C

0

Answer 1

For your 2009 Itasca Navion Motorhome 24H I suggest the Adco Olefin HD All-Climate + Wind RV Cover for Class C Motorhome #AD54ZR. This cover is designed for Class C motorhomes up to 26' in length. Feedback from customers has shown this to be a…

view full answer...

Answer 2

Thank you for all of the details! I will address your questions back to you in the same order. Q1 - The shark fin camera that comes with the Furrion Vision S Camera System #FOS05TASF can be mounted in whatever orientation you'd like. Generally,…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 10

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 11

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 12

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Fit and Compatibility of RV Covers for a 2016 Itasca Navion 24J with Bunk over Cab

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching