Will the Thule Summit 631 Cargo Box Fit the Factory Roof Rack on a 2014 Dodge Grand Caravan

Question

Question:

I picked up a Thule Summit 631 rooftop cargo carrier at a church festival for $20. Is it compatible with the factory installed roof rack bars on a 2014 Dodge Grand Caravan? Thanks.

asked by: John D

0

Expert Reply:

The hardware for the Thule Summit cargo box # TH04997 If the crossbars on your 2014 Dodge Grand Caravan are up to but no greater than 3-3/4 inches wide then the box hardware will fit the bars.

expert reply by: Michael H

0

Answer 1

The ES in the Frontier ES means easy snap. As you have already guessed, the hole spacing is different and you would have to modify the box in order to use an alternate mounting kit on a non-ES box. Modifying the box will compromise the structural…

view full answer...

Answer 2

We have exactly what you need for your Thule Summit! Take a look at the: -Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box #TH04997. Even though it does not say it's for a Summit cargo box, this is the same hardware that was…

view full answer...

Answer 3

To mount your Thule Summit 631 Cargo Box to the roof rack on your 2006 Ford Freestyle, you will need the Replacement Quick Mount Hardware #TH04997. As long as the crossbars on your vehicle roof rack are smaller than 3-1/4 inches wide, this assembly…

view full answer...

Answer 4

For your Thule Summit Cargo Box, the correct mounting hardware kit is the QM3 Quick Mount Hardware #TH04997. This kit includes all of the needed mounting hardware to attach the Thule Summit to the crossbars on your vehicle's roof. We do also have…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Will the Thule Summit 631 Cargo Box Fit the Factory Roof Rack on a 2014 Dodge Grand Caravan

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching