Fit Measurement Recommendations for Sportrack SR1010 Roof Rack on a 2015 Ford Focus Hatchback

Question

Question:

Figment numbers for 2015 Ford Focus 5 door...mine didnt come with the fitment numbers.

asked by: Nate

0

Expert Reply:

I spoke with my contact at SportRack and got the measurements that you will need. First on the front bar the side to side setting is 26. For the back bar it is 24.

The front to back measurements for the front bar measured from the center of the B-pillar forward is 10 inches. And from the center of the front bar back for the placement of the rear bar is 24 inches.

expert reply by: Jameson C

0

click to enlarge

James S.

7/11/2020

Sr1010 For guide for 2015 Toyota Corolla. The instructions online don’t have the 14-19 Toyota models.

Reply

Chris R.

7/16/2020

I reached out to SportRack and for your 2015 Toyota Corolla you will use the following fit measurements when installing the Semi-Custom Rack # SR1010: Front Bar Scale - 16, Rear Bar Scale 14. Then when following the fit chart in the manual A will be 8" and B will be 24".

Reply

Answer 1

It sounds like what you need is the #THKEYN009 replacement key for your SportRack #SR1010 roof rack. We've gotten questions about a number 600 lock core/key, however, the number 600 was never used for the production of lock cores or keys in the…

view full answer...

Answer 2

I spoke with my contact at SportRack and asked about the dimensions on your 2012 Ford Focus. They told me that for your vehicle the measurement for the front crossbar is 10 inches from the center of the door jamb, the rear crossbar is 24 inches from…

view full answer...

Answer 3

Everything needed to install the SportRack Semi-Custom Roof Rack #SR1010 that you referenced on your 2012 Ford Focus is included with the kit. No other parts would be needed. To see how a typical install will look for this roof rack check out the…

view full answer...

Answer 4

The roof rack I recommend for a 2019 Volkswagen Jetta (All Models) is the Rhino-Rack Vortex Aero Crossbar part #RRVA126B-2, part #RRRLKVA, and part #DK424. This system is a great option because it has most of the same features as other top tier…

view full answer...

Answer 5

I checked with our roof rack manufacturers that have fits for your 2019 Volkswagen Jetta like the Rhino Rack #RRVA126B-2, #RRRLKVA, and #DK424 and they all do fit with your panoramic roof but they state not to open the roof with the rack installed.

view full answer...

Answer 6

The SportRack Frontier Semi-Custom Roof Rack #A21002S does not appear on our site among the roof rack options for your 1998 Mitsubishi Montero with Naked Roof because this rack system is not a fit for it. The 50-inch crossbars are too short for the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Fit Measurement Recommendations for Sportrack SR1010 Roof Rack on a 2015 Ford Focus Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching