Max Frame Width Blue Ox Sway Pro Weight Distribution System Can Attach To

Question

Question:

Im sizing up the Blue Ox BXW2000. I need to know the trailer frame width that the clamp lift bracket can span across. Or what is the max width of the trailer frame the clamp on type can handle?

asked by: Alton L

0

Expert Reply:

The brackets of the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW2000 that you referenced can clamp on to trailer frame widths of up to 2-1/2 inches.

I attached a review video for more info as well.

expert reply by: Jameson C

0

Answer 1

Yes. You can use the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 20,000 lbs GTW, 2,000 lbs TW #BXW2000 with the smaller Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 750 lbs TW #BXW4006. The spring…

view full answer...

Answer 2

Based on the amount of tongue weight your trailer has (1600+) the Reese Strait-Line weight distribution system, #RP66075, is one option. It is rated for 1,000 to 1,700 pounds tongue weight so as long as you stay within that range this system will…

view full answer...

Answer 3

I spoke with Blue Ox and they stated that if the 7th link is the one that works best for you on the Blue Ox SwayPro Weight Distribution System part #BXW2000 then that is completely fine and you can use this without issue. That said, if the 7th link…

view full answer...

Answer 4

When deciding what kind of Weight Distribution (WD) system that is best for your setup, you will simply need to find your Total Tongue Weight (TTW). You can find your TTW by adding the Tongue Weight (TW) of your fully loaded and ready-to-go trailer…

view full answer...

Answer 5

To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…

view full answer...

Answer 6

If your Class V trailer hitch on your Dodge truck has a 2-1/2 inch receiver opening I recommend the Blue Ox SwayPro Weight Distribution, part #BXW2000. This system has a 20,000-lb towing capacity and is designed for tongue weight between 1,500 and…

view full answer...

Answer 7

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 8

The Blue Ox Swaypro part #BXW2000 has a tongue weight range of 1,500-2,000 lbs which would work with the tongue weight you listed of 1,525 lbs. Keep in mind that any cargo weight behind the rear axle of the tow vehicle counts as additional tongue…

view full answer...

Answer 9

The difference between the two Blue Ox weight distribution systems is the type coupler they are designed to use with on the trailer frame. The #BXW2000 is designed for standard couplers that attach to the top of the trailer frame whereas the part…

view full answer...

Answer 10

We have three 15,000-lb Blue Ox SwayPro weight distribution systems. Part #BXW1500 has an adjustable shank that has an 8-inch maximum rise and 2-inch maximum drop. Part #BXW1506 includes a shank that has a 13-inch maximum rise and 7-inch maximum…

view full answer...

Answer 11

The Blue Ox SwayPro kit part #BXW2000 has a 2,000 lb tongue weight and 20k total trailer weight capacity, has built in sway control, and comes with a shank for a 2-1/2 inch hitch. This would work well for you and is only option rated high enough.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Max Frame Width Blue Ox Sway Pro Weight Distribution System Can Attach To

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching