Diameter of Nutsert in DeeZee Tailgate Assist Custom Tailgate DZ43301

Question

Question:

Nutsert size n 43200

asked by: Rory

0

Expert Reply:

I went and grabbed the nutsert of the # DZ43301 to measure it and it is .16 of an inch in diameter.

expert reply by: Jameson C

0

Answer 1

I believe you are asking about ordering the nutsert and replacement tool for the DeeZee Tailgate Assist #DZ43301. The only way to get that is with the #BKT43301 that you referenced.

view full answer...

Answer 2

If you are having difficulty removing nutsert in order to install the Replacement Installation Hardware for DeeZee Tailgate Assist #BKT43301, I recommend gently prying it out some. This may be necessary if the nutsert is stripped out. Once pried out…

view full answer...

Answer 3

The blind nut you're speaking of that's used to install the DeeZee #DZ43301 tailgate assist works like a molly bolt. The portion of the bolt inside the tailgate mushrooms out, preventing the nut from pulling through. If it needs to be…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Diameter of Nutsert in DeeZee Tailgate Assist Custom Tailgate DZ43301

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching