Does Valterra City Water Inlet and Lockable Hatch # A01-2000BKVP Come with Check Valve

Question

Question:

Does this have a built in check valve

asked by: Brent

1

Helpful Expert Reply:

Yes, the Valterra City Water Inlet and Lockable Hatch # A01-2000BKVP does come with an included brass check valve.

expert reply by: Jameson C

1

Will W.

1/13/2020

This unit comes with a check valve, but the description and video does not say where the valve is located - the gravity fill or the city water connection? Also, what is the purpose of the check valve? thank you

Reply

Jason S.

1/16/2020

The Valterra RV Fresh-Water Inlet w/ Lockable Hatch - Brass Check Valve - Gravity Fill # A01-2000BKVP has the brass check valve integrated into the fresh water inlet. The purpose of a check valve is to give you a maximum water pressure from that point to the rest of your water system. So when you are hooked up to water at a campsite the water pressure may be too strong for most RV's without that valve. It ensures you don't get too much pressure at your faucet or fluctuating pressure causing a mess in your RV. This valve also has a mesh filter to keep debris out where the gravity fill for filling your RV water tank does not.

Helpful Links

tv-Demo-Valterra-Plumbing-A01-2000BKVP.aspx

Reply

Answer 1

I have an easy solution for you. The BOLT Trailer Hitch Receiver Lock #BL7019344 will utilize your ignition key to lock and unlock your lock, eliminating any extra keys being needed.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The Lippert Components Trailair by Center Point Air-Ride Suspension Upgrade - Triple Axle #LC1565401 are an easy install that require no welding. The Air Ride Equalizers simply bolt into hangers to replace your current equalizers. The kit comes with…

view full answer...

Answer 12

The Lippert Center Point by Trailair Air-Ride Suspension Upgrade #LC1565401 fits most trailers but I do have some things for you to double check just to make sure this will fit your 2018 Heartland Cyclone 4250 triple axle. Your leaf springs need to…

view full answer...

Does Valterra City Water Inlet and Lockable Hatch # A01-2000BKVP Come with Check Valve

Product Page this Question was Asked From

Continue Researching