Will Curt 25K Gooseneck Plate for Fifth Wheel Rails 16055 Fit Pro Series Base Rails

Question

Question:

I have a pro series 5th wheel slider. will the Curt converter plate for a gooseneck fit on the rails.

asked by: John W

0

Expert Reply:

Yes, the Curt 25K Gooseneck Plate for Fifth Wheel Rails # 16055 will fit into any industry-standard 5th wheel base rails like those that came with your Pro Series slider hitch.

The 2-5/16-inch ball on the plate is offset to allow you to choose either of two distances from the end of the plate, either 10-1/2- or 14-1/2 inches, for more or less turning clearance.

expert reply by: Adam R

0

Answer 1

I can get you set up with what you need to safely haul your trailer. We have universal kits like the Curt Universal Fifth Wheel Base Rails with Installation Kit part #C16200. While this on one way to get the rails in the bed I highly recommedn using…

view full answer...

Answer 2

There are 2 different L brackets in the Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish #C16200. One has 3 holes and the other has 4 holes. The mounting holes are consistent in location on both. They are 3/4 inches…

view full answer...

Answer 3

The Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish #C16200 can be used on your 2019 GMC 1500, but it will require drilling into your vehicle frame which isn't a whole lot of fun. At this time they don't…

view full answer...

Answer 4

The info on your Putnam Hawkeye is actually pretty hard to come by since they've been out of business for so long but there's one measurement you can take to determine if it will fit into the Curt Rail Kit part #C16200 that you referenced.…

view full answer...

Answer 5

There are 2 different L-brackets included with Curt universal installation kit #C16200. The taller ones are 7 inches tall, 2-1/2 inches wide, and the top part of the L sticks out 4 inches. The shorter ones are 5-3/4 inches tall, 2-1/2 inches wide,…

view full answer...

Answer 6

Yes, the Curt Universal Fifth Wheel Base Rails with Installation Kit part #C16200 will fit on your 1996 Ford F-250 and it will allow you to use your Pro Series 16K 5th Wheel Hitch. I have attached for you the specific instructions that you will need…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Will Curt 25K Gooseneck Plate for Fifth Wheel Rails 16055 Fit Pro Series Base Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching