Replacement Cover Only for TruXedo Lo Pro QT Tonneau Cover for a 2007 Ford F-150 with 5-1/2 Foot Bed

Question

Question:

Replacement Cover for TruXedo Lo Pro QT Soft Roll-up Tonneau Cover - Black Hi, I need to know which replacement cover is needed for my 2007 F150 XLT, 5.5 ft bed

asked by: Andres B

0

Expert Reply:

The TruXedo Lo Pro QT Tonneau cover for your 2007 Ford F-150 with 5-1/2 foot bed is # TX577601. That means that the correct replacement cover only is # TX577601-CVR.

expert reply by: Michael H

0

Answer 1

The cover replacement you need for your 2015 Ford F-150 with a 5-1/2 foot bed is the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover #TX597701-CVR. The cover will fit over the existing Lo Pro hardware to replace original cover.

view full answer...

Answer 2

The Replacement Cover for your TruXedo Lo Pro #TX597601 on your 2014 Ford F-150 with 5.5 foot bed is #TX577601-CVR.

view full answer...

Answer 3

We have exactly what you need to replace the tarp of the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX569101 that fits your 2016 Ford F-250 Super Duty with a 6-1/2' bed. The correct part is the Replacement Cover for TruXedo Lo Pro Soft Roll-up…

view full answer...

Answer 4

It sounds like you have TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX597601 on your 2006 Ford F-150 with 5.5' bed. The correct replacement tarp for this bed cover is Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover #TX577601-CVR. I have…

view full answer...

Answer 5

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 10

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 11

Based on the information I could find the Samsung MR1031UWC is a countertop style microwave that is 20-11/32" wide, 13-11/32" tall and 14-5/8" deep. Currently we only have over the range and built in style microwaves. If your microwave…

view full answer...

Answer 12

Hey Roger, yes you could remove the trim of the High Pointe Built In Microwave part #HP84ZR and it could sit on a counter top like you asked about. The dimensions listed for it are correct for without the trim kit: 19" W x 11.375" H x…

view full answer...