Which Yakima Roof Mount Bike Racks Work with Factory Cross Bars on a 2004 Subaru Baja

Question

Question:

I have A 2004 SUBARU BAJA W FACTORY X BARS i GETTING DIFFERENT ANSWERS IF THIS WILL WORK ON MY CAR PLEASE LET ME KNOW WHY YAKIMA SAYS IT WONT WORK THANK YOU

asked by: Steve

0

Expert Reply:

Basically, the factory cross bars on your 2004 Subaru Baja are not directly compatible with Yakima roof mount accessories like the FrontLoader Wheel Mount Bike Carrier, # Y02103, because of their size and/or shape. But there is a solution. If you wanted the FrontLoader specifically, you would need to add the Inno Square Bar Roof Rack, parts # INB107, # INTR and # INTR104.. You can then add the FrontLoader.

expert reply by: Michael H

0

Answer 1

Yes, the Yakima HighRoad Roof Mounted Bike Carrier #Y02114 that you referenced is confirmed to fit square load bars such as the Thule square load bars. I attached a review video and installation instructions for this product for you to check out…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 8

Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System #EQ90-00-1600. What you want to do is have the trailer…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...

Answer 12

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...