Chrome Lug Nut Recommendation to Go with the Taskmaster Steel Modular Trailer Wheel that are 1/2-20

Question

Question:

I am interested in what you would recommend for chrome lug nuts to complement these wheels in a 1/2 X 20.

asked by: Andrew

0

Expert Reply:

For a chrome lug nut for 1/2 inch by 20 stud that would go with the part # TA73VR you would want the part # 12CLN which is sold individually. This is a chrome lug nut that matches the size and finish you mentioned so it would work well for you.

expert reply by: Jameson C

0

Answer 1

We do indeed have center caps and lug nuts that will fit the Americana Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM25DR. For the center caps, we have the Excalibur Trailer Wheel Center Cap #319EZ. These are chrome plated steel, but do…

view full answer...

Answer 2

The Taskmaster Steel Modular Trailer Wheel, part #TA73VR has a zero-offset. The rim is 6 inches wide bead seat to bead seat and the mounting surface is right in the middle. This wheel has a 6 on 5-1/2 bolt pattern and has a 4.25 inch diameter pilot…

view full answer...

Answer 3

Since Taskmaster Steel Modular Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Silver Item #TA73VR has a zero offset the backspacing is half the overall width of the wheel. The overall width of the wheel is approximately 7 inches making the…

view full answer...

Answer 4

Using a wheel and tire combination like the Kenda Karrier ST235/80R16 Radial Trailer Tire w/ 16" black Mod Wheel - 6 on 5-1/2 - Load Range E #AM34834 on a tandem axle trailer would give you just over 7000 lbs per axle capacity at your tires.…

view full answer...

Answer 5

Any given 16 inch trailer tire will fit a range of wheel widths. The 235/80-16 and 235/85-16 tires fit wheels that are 6 to 7-1/2 inches wide. On 7.50-16LT tires though the wheel would have to be a 6 inch. On trailers it is better to use the…

view full answer...

Answer 6

There are 2 common misconceptions about trailer tires that can definitely lead to blow outs. The first is to fill the tires to the psi listing on the trailer instead of on the sidewall of the tire, and the second is to reduce or increase the air…

view full answer...

Answer 7

The PSI rating for the Taskmaster Rim part #TA73VR that you referenced is 145 psi. I confirmed this with my contact at Taskmaster. It also has a zero offset. I attached a review video for this rim for you to check out as well.

view full answer...

Answer 8

While we aren't able to balance our tires and wheels (we don't have the proper equipment in house to do so), this isn't typically necessary with trailer tires. Trailer tires and wheels are made different and operate differently. Unlike…

view full answer...

Answer 9

A 7.50-16 sized tire will fit a wheel that is 16 inches in diameter by 6 inches wide. So the Taskmaster #TA73VR will work just fine with it.

view full answer...

Answer 10

No, we offer 16" diameter wheels with a 6 on 5-1/2" bolt pattern in different offsets/backspacings. If the wheel has an offset then it will be listed in the title or on the product page. I have attached a list of these options for you. If…

view full answer...

Answer 11

Yes, you can run 110 psi tires on the Taskmaster steel modular trailer wheel #TA73VR. Make sure that the tires you use are also rated for 110 psi. I have linked a video review of this wheel for you.

view full answer...

Answer 12

The Taskmaster Steel Wheel part #TA73VR is a 16 inch wheel that is 6 inches wide with a 6 on 5-1/2 inch bolt pattern that you said you need so it would work well for you. I attached a review video for you to check out as well.

view full answer...

Chrome Lug Nut Recommendation to Go with the Taskmaster Steel Modular Trailer Wheel that are 1/2-20

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching