Thule WingBar Edge Roof Rack Recommendation for a 2020 Ford Explorer

Question

Question:

Hi. I am searching roof rack on 2020 Ford Explorer. I found the Thule Edge on this website. Will it fit on my car perfectly?

asked by: Eun

0

Expert Reply:

For your 2020 Ford Explorer the correct roof rack components are # TH69FE and # TH69SC.

This gives you black Thule Aeroblade Edge Bars and the correct fit kit for the rack to install, and will fit perfectly.

expert reply by: Jameson C

0

Answer 1

The Inno Aero Crossbars - Aluminum - Black - 48" Long #INXB123-2 with Inno Flush Feet #INXS100 that you mentioned are confirmed to fit the roof of your 2020 Ford Explorer ST with factory raised rails running front to back. These crossbars…

view full answer...

Answer 2

I checked with Yakima and the replacement Mounting Hardware for Yakima PowderHound, Big PowderHound or FreshSesh #Y8860040 will fit the factory crossbars of your 2010 Lexus RX350.

view full answer...

Answer 3

Sorry for any confusion but the Thule Edge Rail Feet #TH69SC does not come with lock cores. So for a set of 4 you'd want the part #TH450400.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Thule WingBar Edge Roof Rack Recommendation for a 2020 Ford Explorer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching