Will Trailer Valet XL Work with Bulldog Couplers

Question

Question:

Will it work with a Bulldog hitch?

asked by: Wayne S

1

Helpful Expert Reply:

Yes, the Trailer Valet XL Trailer Dolly # TVXL2 that you referenced would fit and work well with a Bulldog Collar Lok style coupler.

expert reply by: Jameson C

1

Answer 1

The Trailer Valet XL, part #TVXL2 with 2 inch ball and the #TVXL25 with the 2-5/16 inch ball are meant for use on level surfaces only, they wouldn't work well on the slope you describe.. Actually, I have a much less expensive and easier to use…

view full answer...

Answer 2

You can easily toggle through having the rear assist marker lines visible on the Furrion Vision S Wireless RV Backup Camera System #FOS05TASF right on the face of the monitor. I've linked the instructions for you to reference as well as a clip…

view full answer...

Answer 3

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 4

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 5

Currently the InfiniteRule Trailer Coupler Lock #IR58FR is only offered keyed unique. For a keyed alike option you will want to refer to one of our etrailer Locks #e98886 or #e98889 and select keyed alike from the drop down box when placing your…

view full answer...

Answer 6

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 or the 2 inch ball #TVXL2 have two different drive gears to make it easier to go up an incline or to overcome a lip in the concrete as you described.…

view full answer...

Answer 7

Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…

view full answer...

Answer 8

Yes, we do have a solution for you. I recommend the Trailer Valet XL trailer dolly #TVXL2 which has a 2" ball. This trailer dolly has an integrated drive system that allows you to easily move your trailer. The dual posi-traction wheels help you…

view full answer...

Answer 9

The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…

view full answer...

Answer 10

You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…

view full answer...

Will Trailer Valet XL Work with Bulldog Couplers

Product Page this Question was Asked From

Continue Researching