Which Axles of a Travel Trailer would a Torflex Lift Kit k71-725-02 Fit

Question

Question:

Will he lift kit k71-725-02 fit on my 2000 r vision travel trailer

asked by: Allen B

0

Expert Reply:

You will have to first determine what axles you have on your 2000 R Vision travel trailer. The part # k71-725-02 will fit # 12 Torflex axles with 5,500-7,000-lb capacities which are made by Dexter.

From the research I did on your trailer it looks like you have AL KO torsion axles but your axles could have been swapped at some point.

expert reply by: Jameson C

0

Answer 1

Manufacturers don't keep detailed records of the specific parts that are on year, make and model of trailers, and since those parts could have changed over the years the only way to know if the Torflex Lift Kit #K71-725-02 will work for you is if…

view full answer...

Answer 2

There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…

view full answer...

Answer 3

I went out into the warehouse to measure the Lift Kit #K71-725-02 for you. The holes measure 9 inches on center and 9-1/2 inches on center. I've attached a photo to assist.

view full answer...

Answer 4

The Aluminum Liger Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black #LH97FR you have installed on your trailer should not have a PSI rating as this is typically limited by the valve stem, not the wheel. As long as you are using a quality…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...