Replacement Dome For Ventadome E-Z Lift Trailer Roof Vent

Question

Question:

I am having a hard time finding a vent cover for my ventline vent. My vent is the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan V3094-603-00C. The Maxxair II does not fit because of the built in bracket on the ventline. Does the original Maxxair or camco? If so do I need additional harware to mount it? Thanks

asked by: Jon

0

Expert Reply:

The replacement dome for your E-Z Lift Ventadome Trailer Roof Vent is part # BVE0108-03.

This is a smoke-colored polypropylene cover and is designed to fit your roof vent.

If you want a white replacement cover for your vent, then you need part # BVE0108-00.

If you are looking for the cover that allows you to open the vent then you need the MaxxAir Standard Vent Cover, part # MA00-933067 for smoke colored or part # MA00-933069 for black. These mount to the frame of your vent with the included hardware.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

I spoke with my contact at Ventline and she stated that if you have a newer EZ Lift Ventadome, the correct replacement lid will be part #BVE0108-03. This smoke color lid features a plastic hinge with four mounting points. You can compare the hinge…

view full answer...

Answer 2

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...

Answer 7

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Replacement Dome For Ventadome E-Z Lift Trailer Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching