Trailer Hitch and Wiring for a 2006 Honda Accord
Question:
Hey there I was looking at this product in hopes of hooking up a small motorcycle trailer, but all I see people posting about are bike racks. Is this the product I will need for my 2006 Honda Accord to pull an actual trailer? Also what other parts would I need with it to pull a trailer with a hitch-ball size of 1-7/8 and 2 inches, including electrical. Thank you!
asked by: Jim
Expert Reply:
You can use Draw-Tite trailer hitch # 24787 to tow a trailer with your 2006 Honda Accord. The vehicle does have a towing capacity of 1,000 pounds so provided the gross trailer weight when loaded and ready to tow is less than that then you can tow it.
The recommended ball mount is # 3592 and for a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258.
For trailer wiring you can use # 118302 for a sedan or # C59236 for a coupe. The # 118302 plugs in line with the vehicle tail light wiring, the # C59236 is a hardware installation. Both provide a 4-Way flat connector at the rear of the vehicle. I have linked some helpful videos and help articles for you as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Does Curt Hitch C11327 Fit a 2006 Honda Accord Sedan with Dual Exhaust
- Q&A: Recommended Hitch and Bike Rack for a 2006 Honda Accord
- Q&A: Where are the Attachement Points for Curt Trailer Hitch # C11290 on a 2003 Honda Accord
- Q&A: Protective Cover For Towed Vehicle When Being Flat Towed Behind Motor Home
- Q&A: Correct Curt T-Connector Vehicle Wiring Harness for a 2003 Honda Accord
- Q&A: Recommended Trailer Hitch for a 2006 Honda Accord
- Q&A: Recommended Trailer Hitch And Trailer Wiring For 2007 Honda Accord Coupe
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: What Do I Need To Tow A Trailer?
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Install a Trailer Hitch