Would a Dutton Lainson Strongarm TW400 Replace a 1802A Winch

Question

Question:

I CURRENTLY HAVE A DL1802A HAND WINCH MOUNTED ON MY BOAT TRAILER. IF I REPLACE IT WITH A TW400 STRONG ARM ELECTRIC WINCH WILL THE EXISTING HOLES LINE UP OR WILL I NEED THE ADAPTER PLATE? IS THERE A REMOTE FOR THIS WINCH? THANKS

asked by: Randy M

0

Expert Reply:

Your Dutton Lainson 1802A winch attaches using a very standard style bolt pattern. The Dutton-Lainson TW400 StrongArm # DL25200 also attaches to the same universal style winch attachment bolt pattern so it would work well as a replacement.

expert reply by: Jameson C

0

Answer 1

Would you be able to send me some pictures of your setup? Typically winches like the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 are installed on the boat trailer and they draw power from either the tow vehicle battery via the 12V Power…

view full answer...

Answer 2

The Dutton-Lainson TW400 StrongArm Electric Winch #DL25200 is rated for use with boats up to 4000-lbs total weight. Having roller bunks provides a definite advantage over standard carpeted bunks since this trailer feature reduces friction. However,…

view full answer...

Answer 3

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

view full answer...

Answer 4

I spoke with my contact at Dutton-Lainson regarding the TW4000 StrongArm Electric Winch #DL25200 referenced in your question. She stated that the winch is not designed to serve as a boat strap when traveling so this is not recommended. Once pulled in…

view full answer...

Answer 5

On a boat trailer, you will need to position the Duton-Lainson winch, #DL25215, so that the loading ring on the bow of your boat is the same height or a little higher than the winch drum when the boat is loaded on the trailer. You will need to us a…

view full answer...

Answer 6

The Dutton-Lanison StrongArm Electric Winch #DL25215 is a great replacement for your current PowerWinch 912 as they have similar ratings, the StrongArm 9,000 is rated to pull up to a 9,000 pound boat, while the PowerWinch 912 is rated for up to a…

view full answer...

Answer 7

Yes. There's no reason that the Dutton-Lainson Strong Arm Winch #DL25215 can't be mounted upside down as long as the winch strap isn't rubbing on anything. The capacity of the winch won't be affected with this mounting method, so…

view full answer...

Answer 8

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

view full answer...

Answer 9

You will be able to use the Dutton-Lainson StrongArm Electric Winch #DL25215 with a fully charged battery that is rated for 105 amp hours. This winch, which draws 70 amps, has a 20' strap and even with a full load reels at 6.3 feet per minute.

view full answer...

Would a Dutton Lainson Strongarm TW400 Replace a 1802A Winch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching