Replacement Electric Trailer Brakes for Tandem Axle Trailer Weighing 5,800 Pounds
Question:
I got a wellscargo food trailer 2006 clw142, my trailer has four wheels has mean two axles, electric brakes on four wheels, the trailer has 14foot x 7foot dimesions. like I said this is a food trailer here in orlando florida. I need to replace the electric brakes. I bought from etrailer 6 years ago the brake control tekonsha I think is the brand. Really good. Now I need help to find out the size or kind of bkakes I need for me. mi wheel size is 13inches Empty curb weigth is 1600lbs gvwr is 5800lbs axles 4inch torflex tandem. I want to know what brake will fit, I need the magnet, brake shoes, hardware and everything on one. the drum looks fine. I want to know if I can use self adjust.
asked by: Jaime G
Expert Reply:
Your trailer likely has two 3,500 pound axles which means that you would need 10 x 2-1/4 inch brakes. To determine if this is the case you can pull off one of the drums and measure the inner diameter and width (where the shoes/pads ride). I included a picture showing where to measure. If you come up with something other than 10 x 2-1/4 let me know.
You can use self-adjusting brakes. For the left side use # AKEBRK-35L-SA and for the right side use # AKEBRK-35R-SA. Keep in mind that even self-adjusting brakes need an initial adjustment. After that you will not have to adjust them again.
I have linked some videos on these brake assemblies for you.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Electric Trailer Brake Assemblies For a 2018 Jayco Jay Feather 29QB Travel Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Q&A: Correct Replacement Idler Hubs for Champion Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug