What is the Difference Between the Tow Rax Motorcycle Wheel Chocks TWSPWC3BT and TWSPWC

Question

Question:

What is the difference between the TWSPWC and the TWSPWC3BT wheel chocks?

asked by: William S

0

Expert Reply:

The difference is the included mounting hardware. The # TWSPWC3BT comes with anchors and hardware to attach to metal or wood floors whereas the part # TWSPWC only comes with wood screws.

I attached a review video for both chocks for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with…

view full answer...

Answer 2

If you went with the Tow Rax Wheel Chock part #TWSPWC3BT you could use replacement hardware part #TWPH2770 and basically be able to mount a single chock in several trailers. The chock easily removes off of the hardware by sliding backwards and…

view full answer...

Answer 3

Yes, the mounting hardware part #TWSPWFKM is designed to mount Tow-Rax motorcycle chocks like part #TWSPWC onto a metal floor. The hardware is designed to withstand the weight of a motorcycle such as your Harley but I contacted Tow-Rax and they…

view full answer...

Answer 4

For additional mounting hardware for the Tow-Rax Chock part #TWSPWM you would want the part #TWPH2770. This comes with hardware for both wood and metal surfaces.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

What is the Difference Between the Tow Rax Motorcycle Wheel Chocks TWSPWC3BT and TWSPWC

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching