Will Roadmaster Base Plate to Blue OX Adapter Fit on a 1994 Geo Tracker with Standard Base Plates

Question

Question:

Will the rm-033 adapter work on my 1994 Geo Tracker with a standard Roadmaster base plate to an RV mounted Blue Ox tow bar? Thanks for the info.

asked by: Norm K

0

Expert Reply:

Yes, you are correct, the Roadmaster Base Plate to Blue Ox and Demco Tow Bars Adapter, item # RM-033 will adapt the Roadmaster Standard Base Plate Kit, item # 118-1 for the 1994 Geo Tracker, for use with a Blue OX towbar.

The # RM-033 adapter will work with Roadmaster Standard, EZ or XL Base plate kits. If EZ or XL base plates are used, then the Roadmaster Quick Disconnects, item # RM-201 are required to easily remove the draw bars from the towed vehicle.

expert reply by: Robert G

0

Answer 1

The outer bolt hole center to center distance is 30 inches, and the inner bolt hole center to center distance is 27 inches. The bottom of the adapter also has two 9/16 inch diameter holes that are spaced 17-1/2 inches apart, center to center.…

view full answer...

Answer 2

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 7

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 8

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 9

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 10

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...