Roof Rack and Installation Recommendation for a 2009 Ford Ranger

Question

Question:

I have a single cab 2007 Ford Ranger. Do you have a DIY permanent roof rack for this truck? If so how much is it and can you email me a picture of it?? Thanks,

asked by: Bob P

0

Expert Reply:

For your 2007 Ford Ranger there are a couple options. If you have a regular cab, then I recommend using the Rhino-Rack RS 2500 Roof Rack for Naked Roofs # RRRS143. If you have a super cab, then I recommend the rack consisting of crossbars # RRVA126B-2, feet # RRRLKVA, and fit kit # DK191.

expert reply by: Jameson C

0

click to enlarge

Answer 1

From the top of the camper shell on your truck to the top of the TracRac CapRac part #TH29200XT will measure 10-1/4 inches. Since the bars are 1-5/8 tall that means the legs are 8-5/8 inches. There's no reason you couldn't cut the…

view full answer...

Answer 2

Yes, we have test fit the Yakima Landing pad #Y00221 in a Rhino Rack channel like the part #RTC16 that you referenced and we found they fit perfectly. Since the RTV and RTC channel dimensions are the same that would mean that the Landing Pad fits…

view full answer...

Answer 3

According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part #RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part #RLTP-2 and part #RB1500B-2. The heavy-duty cross bars have a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...