What is the Difference Between Single and Dual Path Compressor Kits for Air Suspension Enhancment

Question

Question:

What is the difference ?

asked by: John

0

Expert Reply:

A single path compressor kit has one outlet basically and can only fill up the air bags to the same pressure. Whereas a dual path can have two different air pressures running in either bag.

The part # AL25690 that you referenced is a great setup for a single path whereas the part # AL25572 is a very similar setup with a dual path ability.

expert reply by: Jameson C

0

Answer 1

Yes, the Firestone Universal Air Tank Mounting Kit part #F2496 will work with the Firestone 5 Gallon Air Tank part #F9248.

view full answer...

Answer 2

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

view full answer...

Answer 3

If you need an on-board air compressor system that will work to not only fill the air helper bags but also inflate tires and other accessories you'll need one with a tank, the Air Lift QuickShot Compressor System part #AL25690 is what I…

view full answer...

Answer 4

For your application you need the Air Lift LoadLifter 5000 which has that 5,000 lb weight capacity you mentioned. Please note that suspension enhancement is designed to help the OEM suspension on your 2021 Ford F-250 and won't increase the…

view full answer...

Answer 5

I do have a solution for you but I spoke with my contact at Air Lift and he said that a system like the One Shot cannot be added to the wireless air compressor system #AL74000. There is no way to regulate the air pressure in the tank with the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is the Difference Between Single and Dual Path Compressor Kits for Air Suspension Enhancment

Continue Researching