Full Hub Assembly with Bearings Already Installed for Boat Trailer with L44649 Bearings
Question:
I have a single axle boat trailer with no breaks and I am looking to carry a spare hub assembly but I am not sure which ones will fit. the wheel size is 12 inches with a 5 on 4 1/2 bolt pattern with 1/2x20 thread pitch. Inner and outer bearings are both 1 - 1/16 inches. also looking for the right size bearing buddy kit to carry
asked by: Dan H
Expert Reply:
It sounds like your boat trailer uses L44649 inner/outer bearings. I have an excellent recommendation that uses these bearings and is pre-greased and comes in a case. Take a look at CE Smith hub assembly # CE13311. It is packed and ready to go! It will work with wheels up to 14 inches and it has the 5 on 4-1/2 bolt pattern with 1/2 inch studs.
For Bearing Buddies that will fit this hub you will need a 1.98 set, # BB1980A.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13311
- Search Results: ce13311
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Search Results: boat trailer wheel hub kit
- Search Results: curt rockerball
- Search Results: anti rattle hitch
- Shop: Anti-Rattle Hitch Pin for 2" Trailer Hitches
- Shop: Malone Anti-Rattle HitchLock System
- Video: Curt Hollow Shank Accessories Anti-Rattle Kit Review
- Video: Lets Go Aero Anti-Rattle Hitch Pin Review
- Video: Malone MicroSport Heavy Boat Trailer Review
- Video: Malone Anti-Rattle HitchLock System Review
- Video: Review of Curt Curt - Hitch Balls - C40047
- Q&A: Can the Lets Go Aero Anti-Rattle Hitch Pin be Used with Tow Bar
- Q&A: Does CE Smith Trailer Hub Assembly Come With Grease Cap
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Search Results: 25580
on Trailer Hubs and Drums
