Trailer Hitch Recommendation for 2010 GMC Terrain Towing Kayak Trailer
Question:
I am looking to put a trailer hitch on my 2010 GMC terrain, 4 cyl. I will be pulling a Malone Microsport XT trailer. It weighs 230 lb plus 2 kayaks about 160 lbs total. total towing weight will be about 390 lbs. What class hitch do recommend and which model do you recommend ? Thank you
asked by: William E
Expert Reply:
For your 2010 GMC Terrain I would still recommend going with a 2 inch hitch like the Curt part # 13591 as it will have more capacity (even though you don't really need it), but 2 inch hitches have more accessories made for them so it would give you greater future hitch accessory flexibility.
For trailer wiring you would then want the part # 56094. Install video for both attached.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Common Torque Specifications for Lug Nut Size
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Q&A: Brake Controller and Wiring Adapter for a 2002 Chevy Suburban
- Q&A: Can Trailer Hitch Be Installed on Vehicle with Rust on Frame
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Vehicle Squeaks After Trailer Hitch Install
- Q&A: Hitch Rattles Against Exhaust of 2019 GMC Terrain
- Article: Pintle-Hitches
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide