How to Measure a Spindle to Identify it
Question:
How do I know what spindle my utility trailer has?
asked by: Randy M
0
Expert Reply:
The easiest way to determine what spindle your trailer has is to use a dial or digital caliper like the part # PTW80157 to measure it where the bearings and grease seal ride. I attached a picture that shows where these measurements are.
If where the inner bearing rides measures 1.378 inches, outer bearing 1.063 inches, and then the seal 1.719 inches the hub part # AKIHUB-545-35-K that you referenced will fit. This is the number 84 spindle.
expert reply by:
Jameson C
0
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: spring shackle kit single axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Suspension & Correct Track
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Fifth Wheel Hitch
- Video: Choosing the Right Brake Controller
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Brake Controller
- Search Results: dust cap
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Article: Trailer Tire Sizing
- Shop: Gooseneck Hitch
- Video: Trailer Hitch Installation - 2011 Toyota Yaris
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)