Compatibility of Curt Class III Hitch 13534 on a 2012 Toyota Highlander w/ 19 Inch Spare Tire
Question:
I have the 2012 Highlander Limited with the 19 inch spare. Will the Curt 13534 fit this?
asked by: Pat B
Expert Reply:
The Curt Class III hitch you referred to, part # 13534 will work just fine with a 2012 Highlander with the full-sized spare tire, as you can see in the photo I've provided.
If you'll be using the hitch as an attachment point for a bike rack or other hitch mounted accessory, I'd highly recommend going with the Draw-Tite Class III hitch, part # 75726. The Curt hitch warranty stipulates that a stabilizing strap like part # 18050 must be used in order to maintain warranty coverage. The problem is, the strap is an extra expense and many vehicles that have a spoiler at the top of the rear hatch aren't compatible with the strap. The strap could place stress on the spoiler and damage it. The Draw-Tite hitch doesn't require a strap. The Draw-Tite hitch is also compatible with the 19 inch spare tire. I've provided a photo showing both hitches installed on a Highlander. You can see how the hitch sits in relation to the spare tire.
If you'll be towing with the hitch, you can use the following parts to complete your towing system:
Trailer wiring harness, part # 118449
Ball mount, part # D-4
Hitch Pin and Clip, # PC3
1-7/8 inch trailer ball, part # 19260 or # 63845 for a 2 inch ball
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Flat Towing Components For A 2024 Chevy Trax
- Q&A: Will EcoHitch Trailer Hitch Receiver # 306-X7137 Fit with Full Size Spare on 2008 Toyota Highlander
- Q&A: Best Ground Clearance Hitch Receiver for Carrying a Bike Rack on a 2013 Toyota highlander
- Article: Roadmaster Tow Bar Feature Descriptions
- Q&A: Differences Between Hitch Receiver Options For 2011 Toyota Highlander
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Bike Rack for 2013 Toyota Highlander That Allows Rear Hatch Access
- Q&A: Is the Finish on the Tow Ready Trailer Hitch Ball # 63853 Shiny or Dull
- Q&A: Difference Between the Curt and etrailer Trailer Hitch for a 2022 Toyota Tacoma
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Performance Chips and Modules