Choosing Firestone Ride-Rite Air Helper Springs Part # F2384 for 2010 GMC Canyon

Question

Question:

Hi i am wondering if the 09 kit fits the 10? As i have a 2010 canyon and looking for a rear airbag helper system. Thank you

asked by: Ryan

0

Expert Reply:

I have emailed one of my contacts at Firestone, who assured me that the Firestone Ride-Rite Air Helper Springs, part # F2384 WILL carry over to the 2010 model GMC Canyon.

I have added a link below to the install instructions for the helper springs.

expert reply by: Mike L

0

Answer 1

Hi Tommy; thanks for the question and while you'll need spacers, your 2010 Chevy Colorado with a 3 inch lift is compatible with the Firestone Ride-Rite Air Helper Springs #F2384. What you'll need is the Lift Spacers for Firestone Ride-Rite…

view full answer...

Answer 2

The first thing you are going to want to do is consult the owners manual for your 2009 Scion xB to determine its capacities. They are likely not the same as the hitch. Whichever is lower, the hitch or the vehicle, is the rating you need to go by. To…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 9

The Firestone Ride-Rite Air Helper Springs #F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. These have a 5,000lb capacity to enhance your factory suspension under load. This will not…

view full answer...

Answer 10

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Choosing Firestone Ride-Rite Air Helper Springs Part # F2384 for 2010 GMC Canyon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching