Diameter of the Mounting Flange on the Convert a Ball Adapter part # CAB-C5G

Question

Question:

Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter - 12inch to 16inch Tall - 20,000 lbs What is the OD diameter of the king pin flange? Thank you in advance

asked by: Larry L

0

Expert Reply:

The overall diameter of the flange of the Convert a Ball Adapter part # CAB-C5G is 11 inches.

I attached a picture that show this and a few other dimensions as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 5

The best option I have for you to tow a 5th wheel trailer using a flat-bed truck with recessed gooseneck hitch is with the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter part #DM8550046. The Demco Recon is designed for this exact purpose…

view full answer...

Answer 6

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 7

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Diameter of the Mounting Flange on the Convert a Ball Adapter part # CAB-C5G

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching