Replacement Seal for Dayton Trailer Hubs with L68149 Inner Bearing
Question:
Looks like I may have mobile home axles with Dayton Spider hubs. I did pull the bearings and found the inter bearing marked 4T L60149. Will this help me get the correct seal and bearing Kit?. Dayton hub had the following written on the face. W6 F226 or266
asked by: Stan
Expert Reply:
Are you sure that the bearing number is L60149 and not L68149? Because I have no information on a 60149 but L68149 is a standard bearing number. This is the inner bearing found on 84 spindles. The seal associated with this bearing and spindle is a 10-19. For a pair it is # RG06-050. These seals are 1.719 inches inner diameter and 2.565 inches outer diameter.
To be sure these seals will fit you can measure the spindle where the seal rides and the diameter inside the back of the hub where the seal goes. the measurements have to be as accurate as possible so I recommend the use of digital calipers # PTW80157.
If it is an 84 spindle then you can use bearing kit # BK2-100.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: How Long Can You Boondock in an RV?
- Q&A: What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: Trailer Maintenance Schedule
- Q&A: Replacement Lens for Glo-Brite 122R and 122Y
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Is a Master Key Needed to Install or Remove a Thule Lock Cylinder
- Q&A: Power Output for Dual Fuel Inverter Generators w/ Parallel Kit Gas vs Propane Operation
- Q&A: What Octane for Electric Start Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit
- Article: Stability Control for Heavy Duty Vehicles
- Article: Gooseneck Trailer Hitch Information and Review