Availability of Keyed Alike Trailer Coupler Latch Locks

Question

Question:

I need 5 , Master Lock Hitch Receiver and Coupler Latch Lock Set - all keyed alike. Can this be done?

asked by: T M

0

Expert Reply:

We have what you're looking for but Master Lock doesn't offer a keyed alike coupler lock. I'd recommend using a similar coupler lock, like our part # e98886. Choose the 'Keyed Alike' option from the drop down menu, and choose the quantity of locks you need.

expert reply by: Mike L

0

Answer 1

There is a solution for you, though the Master Lock Hitch Receiver and Coupler Latch Lock Set #1481DAT will fit coupler latches that are 2". Instead, I recommend the Bulldog Easy Access Coupler Lock #BD580409 which has a 1/4" pin diameter…

view full answer...

Answer 2

I am not sure what application you are using the detent pin for. Typically they are used on something like an umbrella or can be found on some bike or ski racks. We do not offer locking detent pins but we do have locking pins that may work well for…

view full answer...

Answer 3

We have exactly what you are looking for. I recommend the etrailer Surge Brake Coupler Lock #e98888 which has a 3-3/8" span which will work perfectly to lock your coupler when it is attached to a hitch ball, or even when it is not. The #e98888…

view full answer...

Answer 4

The Blue Ox Adjustable Trailer Coupler Lock #BLU56XR comes as individual lock numbers so for a keyed alike option I recommend checking out the etrailer Surge Brake Coupler Lock #e98888 which has the same specs but is only 1/8" shorter. The…

view full answer...

Answer 5

Hitch pins and hitch pin locks like the part #e98882 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The downward force of the tongue weight of the trailer is so great that…

view full answer...

Answer 6

You have a couple of good options. You can use our etrailer.com Coupler Lock, part #e98888, through the latching mechanism on the top of your coupler. This has a wide width so it will clear the sides.

view full answer...

Answer 7

Hitch pins and hitch pin locks like the part #e98882 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The ball mount and ball takes the downward force of the tongue weight so…

view full answer...

Answer 8

You certainly can use the Trimax Coupler lock #TMX47FR with the Demco 2-5/16" Ez latch coupler like the #DM14040-81. The Demco coupler is 2-7/8" wide on the outside so it will undoubtedly fit with the Trimax lock, which is more or less…

view full answer...

Answer 9

The etrailer Surge Brake Coupler Lock part #e98888 can be used to lock both a Demco Easy Latch and a Demco Adjustable Channel coupler. If you order them both at the same time and select the "keyed alike" option, they both come with the same…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...