Recommended 1/4 Inch Locking Pin To Replace Detent Pin  

We have exactly what you are looking for. I recommend the etrailer Surge Brake Coupler Lock #e98888 which has a 3-3/8" span which will work perfectly to lock your coupler when it is attached to a hitch ball, or even when it is not. The…

Hitch pins and hitch pin locks like the part #e98882 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The downward force of the tongue weight of the trailer is so…

You have a couple of good options. You can use our etrailer.com Coupler Lock, part #e98888, through the latching mechanism on the top of your coupler. This has a wide width so it will clear the sides.

Hitch pins and hitch pin locks like the part #e98882 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The ball mount and ball takes the downward force of the tongue…

You certainly can use the Trimax Coupler lock #TMX47FR with the Demco 2-5/16" Ez latch coupler like the #DM14040-81. The Demco coupler is 2-7/8" wide on the outside so it will undoubtedly fit with the Trimax lock, which is more or less…

We have what you're looking for but Master Lock doesn't offer a keyed alike coupler lock. I'd recommend using a similar coupler lock, like our part #e98886. Choose the 'Keyed Alike' option from the drop down menu, and choose the…

There is a solution for you, though the Master Lock Hitch Receiver and Coupler Latch Lock Set #1481DAT will fit coupler latches that are 2". Instead, I recommend the Bulldog Easy Access Coupler Lock #BD580409 which has a 1/4" pin diameter…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…