Titan Electric Over Hydraulic Brake Parts Recommendation for 5,200 lb Axle
Question:
do they make the titan disc brake upgrade kit for larger weight capacity axles? I believe that mine are 5500 per axle.
asked by: David H
Expert Reply:
I have a solution for you, but all of the kits we offer are all designed for 3,500 lb axles.
For the actuator you would want the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 that comes with the breakaway kit.
For a tandem axle brake line kit you would then want the # DM5425, and then for a disk brake kit for 5,200 lb axles you would want the part # K2HR526DKG. The hubs have a 6 on 5-1/2 inch bolt pattern and would require the bearings part # 25580 and # 15123 and grease seal # RG06-070.
Your current hubs would need to have the same bearings and seals in them now for the disc brake kit to fit. If you have different bearing/seal numbers email me back and I will see what we have that would work.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Demco
more information >
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Disc Brakes
- Dexter
more information >
Continue Researching
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: Replacement For Dexter DX12.5 Brake Actuator on Boat Trailer
- Q&A: Which Lift Kit Fits 2010 Forest River R-Pod 172 with Lippert 3,500 Torsion Axle
- Q&A: Replacement RV ladder for 2007 Monaco Diplomat
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Choosing Between Lippert Equa-Flex Or Roadmaster Comfort Ride For 2018 Grand Design Momentum 351M
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 2023 Best Gifts for Outdoor Enthusiasts