Thule Replacement M8 T-Bolt for Thule Ladder Rack #853-5715 Nut Recommendation

Question

Question:

Question, does after market nut size 5/16” with the same tread pitch fit with the T-bolt 853-5715? Let me know. Thank you.

asked by: Akio K

0

Expert Reply:

The Replacement M8 T-Bolt # 853-5715 would need a matching M8 nut like the part # 185917 or for a wing nut part # 753-0776.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement M8 T-Bolt #853-5715 will indeed fit the T-channel on your Thule Caprock Platform. This will definitely be your best option if you need a M8 x 20 T-bolt. It has a 3/4" wide head so it will fit nicely into the crossbars…

view full answer...

Answer 2

We do have an M8 track nut/t-bolt with the part #853-5715.

view full answer...

Answer 3

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 4

Yes, the Replacement M8 T-Bolt part #853-5715 will fit properly within the channels on the Thule Evo WingBar Crossbars. If you are looking for the correct Thule Evo WingBar System to use on your 2019 Kia Niro then you will need to obtain either…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Thule Replacement M8 T-Bolt for Thule Ladder Rack #853-5715 Nut Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching