Front Hitch Recommendation for a 2003 Dodge Dakota

Question

Question:

I have tow plates on my 2003 Dakota so I need to know the specs measurements for bolting the Curt Front Hitch - 31080 to the front frame. I have 35inch span with the tow plate mounted.

asked by: Philip R

0

Expert Reply:

Basically you are going to have to pick which you would rather have installed on your 2003 Dodge Dakota. You can either have front hitch part # 31080 installed or the base plate kit that you currently have installed since they are going to both occupy the same place.

I spoke with my contacts at Roadmaster and they compared the install locations on both products and said that since they will occupy the same install brackets and area they wouldn't play well together.

expert reply by: Jameson C

0

Answer 1

You will first need a tow bar and base plates. The tow bar will fit into the receiver of the motorhome, and attach to the base plates once they are installed on the Dakota. The Roadmaster Falcon 2, part #RM-520 is a good mid-priced option. Either…

view full answer...

Answer 2

We have tow bars that that will work with the Roadmaster Direct-Connect Base Plate Kit #266-3 that fits your 2002 Dodge Durango, but base plates aren't compatible with couplers, just vehicles. This particular base plate will require a tow bar…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Front Hitch Recommendation for a 2003 Dodge Dakota

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching