Parts Needed to Add Electric Brakes to a Dexter 3,500 lb Axle
Question:
I purchased a used 2013 Big Tex car-hauler trailer with electric brakes on the rear axle only. I would like to buy the parts necessary to add electric brakes on the front axle. Axles are Dexter 3500 lb. with 5x5 bolt pattern ez-lube hubs. Can you recommend what I need? Thanks,
asked by: Gary P
Expert Reply:
For replacement hub drums that will fit your Dexter 3,500 axle you would want the part # AKEBRK-35R-SA. This is an EZ lube hub that also has the 5 on 5 inch bolt pattern you need that will bolt right up to your spindle.
For brake assemblies you would then need the part # AKEBRK-35L-SA for the left hand side and then # AKEBRK-35R-SA for the right hand side.
I attached a picture that shows how to wire up both axles for you to check out as well.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Converting 3500 lb Axle from Idler Hubs to Electric Brakes
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: 3500 lb axle with electric brakes
- Search Results: dexter 3500 hubs
- Shop: Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Search Results: trailer brake controller kit
- Search Results: just
- Search Results: brake
- Search Results: brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Review of Dexter Axle Trailer Brakes - Replacement Magnet - BP01-225
- Video: etrailer Trailer Brakes AKEBRK-35L-SA Review
- Q&A: How to Pick Out Replacement Trailer Brake Magnets
- Q&A: What Causes a Brake Magnet To Fall Off After Removing the Hub
- Q&A: Troubleshooting 1 Of 4 Brake Assemblies Locking Up On Tandem Axle Travel Trailer Camper
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies
- Video: etrailer and Ram Jacks Drop Leg Review
- Q&A: How to Add Brakes to a Trailer that Has Idler Hubs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Search Results: tire covers
- Shop: Spare Tire Cover
- Q&A: Brake Mounting Flange Recommendation for Dexter 3,500 lb Axle
- Q&A: Process for Adding Electric Trailer Brakes to an Aluma Trailer
- Video: Demco Trailer Brakes DM60124 Review