Yakima FullBack 2 Bike Trunk Mounted Bike Carrier Part # Y02634 for a 2007 Honda CR-V

Question

Question:

2007 Honda CRV. Does not have trunk mounted spare tire. What would you recommend for rack for 2 bikes.

asked by: mark m

0

Expert Reply:

The Yakima FullBack 2 part # Y02634 would be a great choice for your 2007 Honda CRV. The KingJoe Pro is easy to install and simple to use.

I will include a link to the FullBack 2 instructions for you to review as well as a demonstration video. You can find the link below.

expert reply by: Mike L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...

Answer 3

In order to flat-tow your 2009 Honda CR-V with four wheels downs, which is the recommended way to tow this vehicle according to the owner's manual, you will need base plates, a tow bar, safety cables, a supplemental brake system, a flat-tow…

view full answer...

Answer 4

The RockyMounts HighNoon FC #RKY74MR and MonoRail #RKY10004-10005 are very similar, but do have a few differences. The HighNoon has a 45lb per bike capacity when hauling three bikes or 60lb per bike capacity when hauling only two bikes. The MonoRail…

view full answer...

Answer 5

Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars #INFR, but if you have flush…

view full answer...

Answer 6

Replacing pull-out steps won't require a bunch of modifications if we can find a matching fit to your current steps. To find the correct fit we'll need to know the entry height (measurement from the ground up to the mounting bracket) and the…

view full answer...

Answer 7

I have a great demonstration video that shows exactly what to do! Our expert Jon walks you through how to turn the bottom hooks of the FullBack 2 #Y02634 into the "anchor mode" at the attached video at timestamp 3:25. You simply flip the…

view full answer...

Answer 8

While both fit your 2020 Toyota Prius, the biggest differences between the Saris Bones 2 Bike Rack #SA805BL and Saris Bones EX 2 Bike Rack #SAR83FR is the latter has an added top anchor leg for more stable mounting, as well as strap management so you…

view full answer...

Answer 9

The etrailer Trailer Hitch Receiver #e48AR fits all models of the 2023 Jeep Compass. This includes the Trailhawk with the dual exhaust. For wiring you can use the Curt #C66BR. This wiring harness plugs into the connection points behind the tail…

view full answer...

Answer 10

For your 2024 Toyota Corolla I recommend the Yakima Fullback 2 #Y02634. The adjustable arms will allow a secure fit to the back of your car. The rubber and foam pads will help to protect the paint from scratching/scuffing. The rack itself has a 35 lb…

view full answer...

Answer 11

For your 2024 Toyota Sienna XSE I recommend the etrailer Trailer Hitch Receiver #e56RR. This features a 2" receiver with a bolt-on installation. It has a 350 lb max tongue weight which should be more than enough for your bike rack and bikes. It…

view full answer...

Answer 12

Hey Antone, you are right the battery placement on the 2022 Honda CR-V is the reason the hitches do not fit so a trunk mounted bike rack solution would be your best bet. The one I recommend for your CR-V is the Saris Bones 2 part #SA805BL that you…

view full answer...