Replacement Screen for the Ventadome Model 2128

Question

Question:

You have the Ventline garnish pt.#VA0445-37 and I need the screen base #BVD0444-42 POLAR WHITE, you show it in birch. do you have it in polar white?

asked by: Don

1

Helpful Expert Reply:

Great news, I was able to find the Birch White screen base # BVA0444-32 you were looking for. The Polar White is # BVA0444-42. This will fit the Ventline Ventadome roof vent model V2128.

expert reply by: Jackie C

1

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 5

I completely understand your troubles and confusion with leaf springs. First do remember there are different types of spring steels so the thickness of the leaves is not always the best way to judge the weight capacity for the leaf springs. So while…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

For your vent covers, there are four different hinge types that you might have. In order to know which replacement cover you need, the hinge style is very important. The sizes are all compatible, but the hinges are not. I've attached a photo to…

view full answer...

Answer 8

The correct replacement for your VDO 433 / VDO 434 is going to be the: -Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This part includes the replacement screen with the screen frame, however if you…

view full answer...

Answer 9

The Replacement Remote #LC723915 will work as a wireless replacement remote for camper jack systems LC736514-ELKIT and LC736515-ELKIT. If you have a different model of jack system, let me know and I can check to see if there is a replacement…

view full answer...

Answer 10

The smoke might let a little more light through it, but nothing that noticeable. And aside from that either color does not have the reputation as lasting longer than the other. The white version is part #BV0554-01 and the smoke version is part…

view full answer...

Answer 11

The Ventline Replacement Frame/Screen, Part #BVC0573-41, is shown in the attached photo. I have indicated its inside, outside and mounting hole spacing, and the locations of the knock-out for the switch and the hole for the crank. The inside…

view full answer...