Tools Required to Install Draw-Tite Class III Hitch 76138 on 2016 Mazda CX-5

Question

Question:

is a torque wrench required for installation? What size are the bolt heads?

asked by: Pam

0

Expert Reply:

Trailer hitch installation on your 2016 Mazda CX-5 will require basic hand tools like a 3/4-inch socket and ratchet, and also a torque wrench like # ALL944001. The linked instructions tell you all the tools required to mount Class III Hitch # 76138 on your Mazda CX-5. I also included a helpful article with tips for an easier hitch install.

If you'd like an anti-rattle lock for use with this hitch (to secure a ball mount or bike rack) you might consider the Anti-Rattle Trailer Hitch Receiver Lock # 63201.

expert reply by: Adam R

0

Answer 1

I went out to the warehouse and pulled an Anti-Rattle Device and Lock, #63232. I measured the span of the included wrench and it is 5/8 inches. Any 5/8 inch wrench or socket can be used in place of the flat wrench that is included. I have linked a…

view full answer...

Answer 2

To install the Anti-Rattle Trailer Hitch Receiver Lock #63232 that you referenced you will need to first thread the bolt portion of the device into the hitch, lock it, and then finally tighten the bolt head of the device. Just getting the device…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 5

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 6

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

According to my research the only difference between a 2022 Mazda CX-5 and a 2023 Mazda CX-5 is that they offered an additional paint job for the new model year, meaning anything that is confirmed to fit a 2022 should fit a 2023 without any issues.…

view full answer...

Answer 9

In regards to the Stealth Hitches Hidden Rack Receiver part #391TES317 which is a fit for a 2020 Tesla Model 3, there will need to be an opening made in the underbody panel to allow for the receiver to protrude through. In some cases, there is…

view full answer...