bing tracking image
Q & A Icon

Backspacing of Kenda Karrier ST145R12 Radial Trailer Tire with 12 Inch Aluminum Wheel  

Question:

Whats the backspacing for this wheel? Id prefer to know the distance from the inside face of the bolt pattern to the inside face of the tire, ideally? Im trying to figure out what the maximum width is I can do of my axles to reach the 102inch maximum width. Im planning to use these: A35RD545E so maybe Timbren could help too, if they knew the backspacing. Thanks for the help,

0

Expert Reply:

I went out to the warehouse to measure the Aluminum Lynx Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Silver
Item # LH45FR to find the spacing from the back face of the mounting holes to the back face of the tire for you. I found this to measure 3 inches.

The Timbren Axel-Less Trailer Suspension # A35RD545E measures 6 inches from the hub face to the outside of the mounting bracket. The Karrier # AM31215 has a section width of 5.7 inches. Since the wheel has a 0 offset, we will want to add half of the section width to the hub face measurement, to get 8.35 inches. This is how far away the tire will sit from the mounting bracket of the suspension system.

expert reply by:
0
Victoria B

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>