Anti-Rattle Device Recommendation for a 2-1/2 inch Hitch with 2 inch Hitch Reducer

Question

Question:

I have a 2014 dodge ram 2500 , it has a 2 1/2 reciever with a 2 inch adapter. When i install my 2 inch trailer hitch or bike rack there is to much slopinch between the 2 1/2 inch and the 2 inch adpter and also between the adapter and the bike rack or hitch. The bike rack flops around like a fish out of water. CAN YOU HELP ME

asked by: CARSON

0

Expert Reply:

The Blue Ox Immobilizer part # BX88312 would exactly what you would need.

This anti-rattle device is designed specifically for 2-1/2 inch hitches using a 2 inch accessory and will take all of the movement out of the setup.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Quiet Hitch #RM-061 is designed to fit 2 inch receiver hitches, but there are a few hitches out there that have a larger outside measurement than others. Typically this will be an issue on Toyota trucks, but this may be what is going…

view full answer...

Answer 2

The Malone Anti-Rattle HitchLock System part #MPG908 will help hold the shank of the weight distribution system inside the receiver tube more securely. Therefore, you won't have as much side to side or front to back movement with the shank…

view full answer...

Answer 3

While we do have an option for you, the Hollywood Racks hitch tightener won't work with a 2-1/2 inch receiver. Instead, what you can use is the: - Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062

view full answer...

Answer 4

Is the situation that you have a DiversiTech ball mount with a 2" shank that you're using with a 2-1/2" receiver? We have some anti-rattle devices that could help but it will help if I can get some photos of what you have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Answer 9

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Anti-Rattle Device Recommendation for a 2-1/2 inch Hitch with 2 inch Hitch Reducer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching